Loading...
Loading...
// Layout Fast Clock
#include <TM1637Display.h>
const int CLK = 2;
const int DIO = 3;
TM1637Display display(CLK, DIO);
int hours = 8, minutes = 0;
int speedRatio = 4; // 4:1 fast time
void setup() {
display.setBrightness(7);
}
void loop() {
display.showNumberDecEx(hours * 100 + minutes, 0b01000000, true);
delay(60000 / speedRatio); // Scaled minute
minutes++;
if (minutes >= 60) { minutes = 0; hours++; }
if (hours >= 24) hours = 0;
}This is starter code - modify and expand for your specific needs.
Before building this project, make sure you have the Arduino IDE installed and are comfortable uploading basic sketches to your board.
Most projects use standard Arduino libraries. Some may require additional libraries like AccelStepper, Servo, or NmraDcc - install these through the Arduino Library Manager.