Loading...
Loading...
// Day/night cycle with sunrise/sunset
const int SKY_PIN = 9;
const int WARM_PIN = 10;
void setSkyBrightness(int hour) {
int brightness;
if (hour >= 6 && hour <= 8) {
// Sunrise
brightness = map(hour, 6, 8, 0, 255);
} else if (hour >= 18 && hour <= 20) {
// Sunset
brightness = map(hour, 18, 20, 255, 0);
} else if (hour > 8 && hour < 18) {
brightness = 255; // Day
} else {
brightness = 0; // Night
}
analogWrite(SKY_PIN, brightness);
}This is starter code - modify and expand for your specific needs.
Before building this project, make sure you have the Arduino IDE installed and are comfortable uploading basic sketches to your board.
Most projects use standard Arduino libraries. Some may require additional libraries like AccelStepper, Servo, or NmraDcc - install these through the Arduino Library Manager.