Separate Accessory Power Bus

Wire a dedicated power bus for turnout motors, lights, and accessories separate from track power.

Wiring Steps

1
Choose a power supply appropriate for your total accessory load
2
Run separate bus wires from the supply around your layout
3
Install terminal blocks at convenient locations
4
Connect accessories to the nearest terminal block
5
Add fusing to protect the supply and wiring

Tips for Success

Keep accessory power completely separate from track power
This prevents accessory faults from affecting train operation
Use DC for LEDs and most motors, AC for some switch machines
Consider multiple supplies for different voltage requirements

Safety Reminder

Always disconnect power before working on wiring. Double-check all connections before applying power. When in doubt, use a multimeter to verify your work.

DCC Power District Setup with Boosters Frog Juicer Wiring for Peco Electrofrog

Tech Hub/Wiring Diagrams/Separate Accessory Power Bus

beginnerPower

Separate Accessory Power Bus

Wire a dedicated power bus for turnout motors, lights, and accessories separate from track power.

Wiring Steps

1
Choose a power supply appropriate for your total accessory load
2
Run separate bus wires from the supply around your layout
3
Install terminal blocks at convenient locations
4
Connect accessories to the nearest terminal block
5
Add fusing to protect the supply and wiring

Tips for Success

Keep accessory power completely separate from track power
This prevents accessory faults from affecting train operation
Use DC for LEDs and most motors, AC for some switch machines
Consider multiple supplies for different voltage requirements

Safety Reminder

Always disconnect power before working on wiring. Double-check all connections before applying power. When in doubt, use a multimeter to verify your work.

DCC Power District Setup with Boosters Frog Juicer Wiring for Peco Electrofrog